startUp touring adapter JR
startUp touring adapter JR - 245-305mm / grey/blue is backordered and will ship as soon as it is back in stock.
contour startUp JR gets kids going
Our ski touring adapters for children can be adjusted to the right sole length in just a few steps and inserted into the alpine binding. After stepping in with the ski boot, a comfortable ascent with skins is possible. The folding climbing aid makes steep climbs easier. The adapter is suitable for children from around 6 to 12 years of age.
Important: When descending, always remove the startUp ski touring adapter from the binding and simply store it in your backpack!
Adjustable for sole length 245 – 306mm (smaller see startUP KID )
low additional weight of only approx. 840g/pair
Stuff sack included
Maybe the hybrid KIDS cut skin will make it easier for you to get started...
Adjusting to the alpine binding : Read or measure the sole length on the ski boot. On the underside of the startUp, lift the rail with your finger and move the heel piece so that the length closest to that on the ski boot is visible in the small viewing window. When you release the tab, make sure that it clicks securely into place so that the heel piece cannot move any further.
Adjusting to the ski boot: Lift the upper part (binding plate) and press the small clamps on the middle bar together. The two segments can now be tilted and moved. Pay attention to the arrow marking on the top at the length indication and snap the parts into place at the length indication that is closest to that on the ski boot. The height of the front bar can also be adjusted. Pull the slider out to the side, move the bar up or down one level and secure it again with the slider.
Insert the startUp ski touring adapter into the alpine binding like a ski boot. Then put the ski boot into the heel bar and close the front bar. The ski boot should be securely fixed in the adapter binding. The folding climbing aid makes steep climbs easier.
Before setting off, release the front bar, get out of the startUp ski touring adapter and then remove the adapter from the alpine binding.
Click here for the video...